1BARGE GAP

z

The PPGL, PPGI with yield strength from 350-550mpa, thickness from 0.40-0.50mm with spectrum of color. It is used in field of construction for bordering or front roof

3PLAIN RIDGE

z

To Merge gap Between two corner sheets. The available material are PPGL, PPGI with yield strength from 350-550mpa, thickness from 0.40-0.50mm with spectrum of color.

5CORNER FLASHING

z

To cover the two vertical corner sheets and it is available in material of PPGL, PPGI with yield strength from 350-550mpa, thickness from 0.40-0.50mm with spectrum of color.

7CLEAT

z

It is to support the Z purline in structural buildings and Range of thickness from 4-6mm.

2GUTTER

z

To collect flowing from sheet and it is fixed at end of sheets. The available material are PPGL, PPGI with yield strength from 350-550mpa, thickness from 0.40-0.50mm with spectrum of color.

4L FLASHING

z

To cover the two vertical sheets or can be used as Rigde, corner flashing, Barge gap and it is available in material of PPGL, PPGI with yield strength from 350-550mpa, thickness from 0.40-0.50mm with spectrum of color.

6DOWN SPOUT

z

To make to flow water to lower level from gutter and it is available in material of PPGL, PPGI with yield strength from 350-550mpa, thickness from 0.40-0.50mm with spectrum of color.

8DRIP FLASHING

z

This is used at bottom of vertical sheets and it is available in material of PPGL, PPGI with yield strength from 350-550mpa, thickness from 0.40-0.50mm with spectrum of color.